Send inquiry
| Mini Gantry CNC cutting machine | |
| 1.Professional, stable running | |
| 2.Easy to operate | |
| 3.Flame and plasma | |
| 4.Prompt shippment | |
| Mini Gantry CNC cutting machine | |
| This type of cutting machine for small gantry structure for the portable, horizontal span option 2m, 2.5m, 3m, vertical rail a 3m / section; linear guides are used, bilateral drive, gantry cutting is one of the most economic species. Can be configured according to user requirements more than the separatist regimes can also be configured to dual-flame and plasma cutting; optional automatic adjusting system. | |
| parameter | |
| Model | LHLM-3A |
| Cross Beam width | 3m |
| Longitudinal Rail Length | 3m(can be lengthened according to user's demand) |
| Effective Cutting Width (X axis) | 2.4m |
| Effective Cutting Length (Y axis) | 2m(Rail can be lengthened according to user's demand) |
| Cutting Mode | Flame only; Plasma only,Flame and Plasma |
| Drive Mode | Dual-side |
| Drive Method | Rack and pinion drive for X and Y axes |
| Flame Cutting Thickness | 6-200mm |
| Plasma Cutting Thickness | 1-60mm (according to the specification of plasma power source) |
| Cutting Speed | 0-3500mm per minute |
| Moving Precision | 0.01mm per step |
| Power Source | 220V 50Hz 500-1000W |
| Cutting Gas | Acetylene, Propane |
| Plasma Gas | Pressed air, Oxygen, N2 |
| Nesting Software | INTERGNPS, FASTCAM |
| Torch Height Controller (AUTO) | CHC600(Capacitive height control for flame cutting) |
| PHC330(Arc voltage height control for plasma cutting) | |